Sony STR-DG600 Operating Instructions Manual page 7

if)
-1
Name Function
[] SW
[] LFE
[] SP A/SP B
Name Function
Lights up when sub woofer [] rlrlPRO
selection is set to "YES" (page LOGIC (11)1
43) and the audio signal is (llx)
output from the SUB WOOFER
jack.
Lights up wlmu the disc being
played back contains an LFE
/Low Frequency Effect)
channel and the LFE channel
signal is actually being
reproduced.
[] NDDIGITAL
(EX)
Lights up according to the
speaker system used. However,
these indicators do not light up
if the speaker output is turned
off or if a headphone is
connected.
Lights up when Dolby Digital
signals are input. "Flt'l
DIGITAL EX" lights up when
Dolby Digital Surround EX
signals are decoded.
Note
When playing a Dolby Digital
format disc, be sure that you
have made digital commctions
and that INPUT MODE is not
set to "ANALOG" (page 71).
Lights tip when the receiver
applies Pro Logic processing to
2 channel signals in order to
output the center and surround
channel signals. -rlrl PRO
LOGIC II" lights up when the
Pro Logic 11 Movie/Music/
Game decoder is actiwned.
"Flt'l PRO LOGIC Ilx" lights up
when the Pro Logic Ilx Movie/
Music/Game decoder is
activated. However, these
indicators do not light up if both
the center and surround
speakers are set to "NO" (page
43) attd you select a sound field
using the A.ED. button.
Note
Dolby Pro Logic IIx decoding
does not fimctiou for DTS
format signals or lkwsignals
with a sampling frequency of
more than 48 kHz.
[] DTS (-ES)/
(96124)
Lights tip when DTS signals are
input. "DTS-ES" lights up
when DTS-ES signals are input.
"DTS 96/24" lights up when the
receiver is decoding DTS 96
kH_'/24 bit signals.
Note
When playing :, DTS format
disc, be sure that you have made
digital connections and that
INPUT MODE is not set to
"ANALOG" (page 71 ).
[] NEO:6 Lights up when DTS Neo:6
Cinema/Music decoder is
activated (page 55).
continued_
7_s