Table of Contents
Advertisement
D6001DE-L Series Double Egress Power Operator Unit
C. Secure Backplates.
1. Secure backplates to frame using eleven (11):
1/4-20 x 5/8" machine screws or
1/4 x 1-1/2" self-drilling screws from screw
packs in Boxes 1 and 2 (Figure 7).
NOTE: It is important to properly secure
top edge of backplate. Use of blocking
(supplied by others) or shims (provided) to
fill gap between backplate and wall above
header is HIGHLY recommended. Material
must comply with local codes. Failure to
OR
properly secure top of backplate could result
in operator being allowed to 'rock' during
operation. This could result in damage to
operator and diminish operator function.
(Figure 7)
D. Prepare doors for Track and Arm Shoe.
1. Locate and prepare track holes in door.
(Figure 8)
NOTE: Template provided on page 16.
2. Drill 3/8" (9.5mm) through (3 places) for sex
bolts.
1-13/16
(46)
from Rabbet
E
Hinge or Pivot
Copyright © 2023, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole or in part
without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.
80-9360-1048-020 Rev 1 01/23
3/8 Dia.
Sex Nuts
(2 Places)
4-1/8
(105)
Door
Opening
85°
Angle
13-1/4"
Dimension G
(337mm)
(320mm)
Model
Dim H
DEL
5-3/8" (137mm)
DEL1
7-3/4" (197mm)
DEL2
Approved 2023-11-10
Blocking
Figure 7
3. Locate and prepare arm shoe holes in door.
(Figure 8)
NOTE: Template provided on page 16.
4. Drill 3/8" (9.5mm) through (2 places) for sex
bolts.
1-11/16
(43)
from Rabbet
Figure 8
90°
95°
100°
12-5/8"
12"
11-1/2"
(305mm)
(292mm)
3/8 Dia.
Sex Nuts
11
(2 Places)
(279)
22
(559)
Hinge or Pivot
105°
110°
11-1/8"
10-3/4"
(283mm)
(273mm)
5-3/8
(137)
7
Advertisement
Table of Contents
