Displaying The Operating Mode Of The Equipment (Info N° 11016) - Studer VarioTrack VT-40 User Manual

11008 kWhR
11009 MWhT
11010 Cd-1
11011 Ed-1
11015* Type
11016* Mode
11017* PVmx
11018* Ibmx
11019* PVxP
11020 Bmax
11021 Bmin
11025* Sd
11026* Sd-1
11034* Err
11037 EqIn
11038 Phas
11066 Sync
11069 VT state
11076 locEr
11082 RME
11083 Tbox
11085* Error
11086* Mode
11087 Redy
*these values can't be displayed in the multi-unit display. They will be visible while going in the sub-
screen of the Multi-unit display, showing every unit individually.
8.2.1.2 Displaying the triggering source of the auxiliary relays
To view the actual triggering source of the two auxiliary relays, press the SET button and use the
up/down arrows to navigate down to the two relay fields (b). Select one of the two relays and press
SET to view the information indicating the cause of the last relay activation (if the relay is presently
activated) or deactivation (if the relay is presently deactivated. The display also shows the logic
combination mode: AND or OR.
To exit the selected relay field, press ESC.
These information fields are visible even if the auxiliary relay ARM-02 see chapter 9.3, is not
connected.
8.2.2 Displaying the operating mode of the equipment (Info n° 11016)
Night: the solar generator voltage (or luminous intensity) is not enough to start the equipment. When
this indication appears during the day, it means a generator fault (wiring).
StartUp: the solar generator (or luminous intensity) is not enough to start the equipment but sufficient
to produce power. This indication only appears in the morning or in the evening.
Charger or Charge: the charger operates normally at the maximum power point of the solar
generator
Manuel utilisateur
kWh Produced energy resettable counter
MWh Total produced energy
Ah Production in (Ah) for the previous day
kWh Production in (Wh) for the previous day
Text Model of VarioTrack (VT-80, VT-65, VT-30, VT-HV)
Operating mode (Night, StartUp, ---, Charger, ---, Security, OFF,
Text
---, Charge, Charge V, Charge I, Charge T, Ch. Ibsp)
Vdc Max PV voltage for the current day
Adc Max battery current of the current day
kW Max power production for the current day
Vdc Max battery voltage for the current day
Vdc Min battery voltage for the current day
h Number of irradiation hours for the current day
h Number of irradiation hours for the previous day
Type of error (No Error, BatOverV, Earth, No Batt, OverTemp,
Text
BatOverV, PvOverV, Others, ---, ---, ---, ---, HardErr)
days Number of days before next equalization
Battery cycle phase (Bulk, Absorpt., Equalize, Floating, ---, ---,
Text
R.float., Per.abs., ---, ---, ---, ---)
Synchronisation state (---, ---, ---, ---, XTslave, VTslave, ---, ---,
Text
VTmaster, Autonom., VSslave, VSmaster)
Text State of the VarioTrack (Off, On)
Local daily communication error counter (CAN)
Text Remote entry state (RM EN 0, RM EN 1)
°C Internal temperature of the box
Type of error (No Error, BatFaOV, Earth, No Batt, OverTemp,
Text BatOver, HdcOverV, HdcShort, ---, BatUC, ---, BatOC, HardErr,
BatUV, MotorOL, StartErr)
Text Operating mode (Error, OFF, Night, Solar, Catenary, Boost)
Text Motor running allowed (No, Yes)
V 4.0
Studer Innotec SA
VarioTrack
27