Connection Compartment - Studer VarioTrack VT-40 User Manual

Termination switch
8
Configuration switches
9
Real-time clock battery
10
(type CR 2032)
Screw to close the front cover
11
Remote entry
12
Jumper for programming of the
13
remote entry
4.2 C
ONNECTION COMPARTMENT
Manuel utilisateur
The switch must be placed in position O (towards (9)
when both connectors (7) are used).
The various possible configurations are described in sect.
8.1.
The equipment is fitted with a battery lasting about 10
years.
These screws should be tightened to a torque of 5Nm to
guarantee the IP rating of the VarioTrack.
Available as from software version 1.5.22. Allows the
control of a function – to be defined by programming –
by the closing of a dry contact or by the presence of a
voltage across these terminals.
See sect. 8.4.10.3 – p. 37 and in fig. 4.2. By default, they
are positioned at A-1/2 and B-2/3.
V 4.0
Studer Innotec SA
VarioTrack
11