Comments On The Wiring Examples - Studer VarioTrack VT-40 User Manual

Studer Innotec SA
VarioTrack
11.2 C
OMMENTS ON THE WIRING EXAMPLES
Elem. Description
a Remote control
b Battery
c Photovoltaic generator
d Lightning protection device
e Communication cable
f DC protection device
k Inverter Charger
s Battery Temperature sensor BTS-01
T Protective earth
T1 Protective
equipment
T2 Protective earth for the battery
T3 Protective earth for the solar
generator
T4 Protective earth for the generator
or the AC source
U AC wiring related to the Xtender,
not described in this manual
V Wiring related to the BSP, not
described in this manual
* National installation standards specific to the chosen application field must absolutely and as a
priority be respected under the installer's responsibility.
46
earth for the
Refer to
See chap. 9.1, 8.2 and 8.4.11
See chap. 4.4
See chap. 4.3
See chap. 4.7
See chap. 4.8
See chap. 4.4.4
See chap. 10.1
See chap. 9.2
*Main protective
bonding connected to the conductive and accessible
parts of the building and if possible, connected to a
standard earth electrode.
*The equipment is designed to be connected to a
protective earth (Class I) to which they must be
connected.
*The battery negative pole must be earthed. The other
configurations must meet the recommendations at
chap. 4.6
*The protective earth for the PV generator and its
lightning protection device are connected separately
to the main protective earth (local equipotential
bonding).
*Most often, within
recommended to connect the earthing of the whole
frame and the earthing of the lightning protection
device to the main protective earth (T).
See chap. 10.1
See chap. 10.2
V 4.0
earth/protective equipotential
a hybrid installation,
User manual
it is