Table of Contents
Advertisement
3.3.2 Output Wiring
Outlet and terminal block are available for output connection from UPS , with refer to figure
in section 2.3.1： Please find rated output capacity of product , avoid overload and used wire
with sufficient current rating, with refer to below table .
Rating
Model
Capacity
1K
1kVA
2K
2kVA
3K
3kVA
Procedure for output wiring:
1. Plug the AC input cord of the equipment needs UPS protection to the Outlet of the UPS.
2. To connect more equipment than available Outlet number, please use extension cord, connect to the
Outlet or output terminal block, mind the total consumption current must not exceed rated current capacity of
the product.
3. The output terminal is protected by a cover, uncover the terminal, use appropriate connecting
terminal , prepare well the wire.
4. Fix the prepared wired to the terminal block, find the silkscreen marking for polarity of the wiring.
3.3.3 External Battery Module
Connection of external battery is ABSOLUTELY CRITICAL. Any mistake may result in serious
injure of electric shock or fire, damage of product below steps must be strictly followed:
Nominal Output
Rated output
Voltage
Current
4.3/4.5/4.3/4.2A
208/220
8.6/9.1/8.7/8.3A
/230/240Vac
13/13.6/13A/12.5
Quantity of output
socket
4 x IEC-C13
4 x IEC-C13
4 x IEC-C13
A
+1 x IEC-C20
14
Output terminal
Terminal Block
block & wiring
Tightening
cable
Torque
AWG/Cross-
NA
NA
section Area
16AWG/1.0mm2
0.5Nm
(4.4 Lb In)
14AWG/1.5mm2
Advertisement
Table of Contents
