Table of Contents
Advertisement
3.3.4 Communication Cable
RS232: Connect UPS computer Interface (RS232) and monitor equipment through
communication cable.
Intelligent Card Slot is used to install NMC (Network Management Card), AS400 Card ,
CMC(Centralized Monitoring Card), to implement Network Monitoring, RS485 based ModBUS protocol
monitoring.
The USB port is a serial port emulator will allow you to create virtual RS232 ports linked via a
USB Port, the UPS could be manage through the same management software, while does not support
HID USB Power part operating mode.
The Product also provide optional Modbus Port, Relay Dry contact card, refer to optional port
user manual for application.
3.3.5 Software
Free Software Download – WinPower
WinPower is brand new UPS monitoring software, which provides user-friendly interface to
monitor and control your UPS. This unique software provides safely auto shutdown for multi-computer
systems while power failure. With this software, users can monitor and control any UPS on the same
LAN no matter how far from the UPS.
Installation procedure:
Visit website for downloading the management software: http://www.ups-software-download.com
Choose the operation system you need and follow the instruction described on the website to
download the software
When downloading all required files from the internet, enter the serial No: 511C1-01220-0100-
16
Advertisement
Table of Contents
