Graco G3-G-24MX-2L0L00-10CV00R0 Instructions Manual page 57

NOTE: When prelube is on, and the pump is pow-
ered-up, the pump will run this amount of lubrica-
tion ON sequences.
3. Press the ENTER button to exit
Advanced Programming after the last
digit of the prelube sequence is dis-
played.
332305R
A13- MM:SS OFF Time
This function changes the programming of the OFF
Time.
OFF and Warning LEDs Illuminate
F . 46
IG
1. The default OFF is
displayed.
Off/Backup time in
setup mode is
displayed in HH:MM
(Hours/Minutes).
2. Press the UP or DOWN ARROW
to change OFF to ON on the dis-
play. The OFF/Backup Time in
setup mode will be displayed in
MM:SS (Minutes/Seconds).
3. Press the ENTER button to exit
Advanced Programming.
Advanced Programming
57