Graco G3-G-24MX-2L0L00-10CV00R0 Instructions Manual page 34

Max Model Setup
2. The LED next to the LOCK ICON on
the display lights and the 4 zeros
appear on the display indicating the
system requires a PIN Code entry to run the G3 in
SETUP MODE.
3. The cursor is automatically
positioned to enter the first
character of the PIN Code.
Use the UP and DOWN
ARROW buttons to move up
and down through the numbers 0-9 until the first
number in the PIN code is displayed in the field.
4. Press the ENTER button to set the
number. The cursor automatically
moves to the next number field.
5. Repeat steps 3 and 4 for each PIN Code prompt
field.
If the PIN Code you entered is correct, the first editable
character on the display will flash.
NOTE: A blinking field on the display indicates the G3 is
in SETUP MODE. In RUN MODE numbers on the dis-
play will not blink.
Set the Real Time Clock
™
DMS Equipped Models Only
NOTE: Set the real time clock prior to plugging the USB
flash drive into the pump.
Enter the Year:
• The year displays.
The first programma-
ble character, the
decade, blinks indi-
cating the device is
ready to program the
decade digit of the year.
• The LED under the # sign lights while setting the
year.
1. Use the UP and DOWN arrow but-
tons to move up and down
through the number 0-9 until the
number for the current decade is
displayed in the field.
34
2. Press the ENTER button to set the
decade number. The cursor auto-
matically moves to the next field,
the year number.
3. Use the UP and DOWN arrow but-
tons to move up and down
through the number 0-9 until the
number for the current year is dis-
played in the field.
4. Press the ENTER button to set the
year number.
The 3-character month displays indicating the G3 is
now ready to program the month.
Enter the Month:
1. Set the 3 character month by
using the UP and DOWN ARROW
buttons to move up and down
through the list of months until the
current month is displayed in the
field.
2. Press the ENTER button to set the
month.
The 2-digit date displays indicating the G3 is now
ready to program the date.
Enter the 2-digit Date:
The first programmable
character of the 2-digit
date blinks indicating the
device is ready to pro-
gram the first digit of the
date.
The LED under the # sign lights while setting the date.
1. Use the UP and DOWN ARROW
buttons to move up and down
through the numbers 0-3 until the
first digit of the date is displayed in
the field.
332305R