Table of Contents
Advertisement
16.0 WHEEL LIFTING AND CENTERING ONTO CENTER-PLATE
Before lifting and positioning the wheel onto the centre-plate, please:
- remove all weights from the rim by a proper tool carefully,
- remove any object or tool which could interfere the wheel lifter (available as optional).
- put the wheel vertically onto the wheel lifter, rim back facing the Tyre-Changer.
- lift the wheel by pedal ref. 19 completely (Fig. 1, Fig. 2).
Fig. 1
19
-Position the wheel onto the centre-plate making the centre hole
match-up with the rotation axle of the centre-plate
- Match one of the lug holes with the driving pin of the centre-plate
(Fig. 3).
- Lower the lift by releasing pedal ref. 19.
Reverse mounted wheels should always be positioned and
clamped on the centre-plate up side down. When clamping, use
FRR Quick wheel clamping adaptor for reverse mounted and
plastic clad wheels (optional, see page 28). Follow the instructions
given in FRR Quick manual.
17.0 WHEEL CLAMPING OPERATION WITH SMART LOCK (PATENTED)
- Patented ultra-quick wheel clamping system makes it easier for operators to per-
form a tough and steady wheel clamping by simply turning a lever.
- The clamping is performed by an expanding nut. Both strength and grip can be
easily calibrated by acting on its adjustment button and by means of an appropriate
adjustment knob.
- SMART LOCK weighs just: 4,5 Kg.
Fig. 2
19
Fig. 3
Driving pin
14
Center plate
Advertisement
Table of Contents
