Placing The Wheel Rim On The Wheel Balancer; How To Compensate Unbalance Of Flanges Using Afc Function - Fasep BALATRON 331.G3 User Manual

Fasep 2000 srl
Balatron 331.G3: User's Manual
5.1

Placing the wheel rim on the wheel balancer

5.1.1 Select the cone or flange suitable for the wheel to be balanced.
G
NOTE: The operation of centering and tightening of the wheel on the flanges is of basic importance for correct balancing.
Good results depend on proper performance of these procedures.
Clean accurately all cones, shaft and adapter surface before placing the wheel on the wheel balancer.
!
CAUTION:
5.2

How to compensate unbalance of flanges using AFC function

G
NOTE: This operation allows to put compensate unbalance of flange and other accessories.
5.2.1 Lock the required flange on the shaft without the wheel.
HOW TO TURN ON AFC FUNCTION
Always make sure flanges are correctly locked on the motor shaft and wheel is correctly locked on the
flange being used.
Press FUNC up to AFC
The AFC led blinking
The AFC led is on
HOW TO TURN OFF AFC FUNCTION
5-2
Rev. 1.2
May 31, 2013
Remove the flange.
Press FUNC up to AFC
The AFC led switch off.