Thank You; Warranty; Safety - SawStop REVOLUTION TSA-RMG Owner's Manual

THANK YOU

Thank you for purchasing the SawStop Revolution Miter
Gauge. This product has been carefully designed,
rigorously tested, and contains innovations not seen
before in the market place. We want you to get the most
out of this product. To ensure the best possible
experience, please read the instructions in their entirety
prior to use. In this manual, you will find detailed
instructions for the correct, accurate, and safe operation
of your miter gauge.

WARRANTY

SawStop warrants to the original retail purchaser of a
new Revolution Miter Gauge from an authorized SawStop
distributor that the Revolution Miter Gauge will be free
from defects in material and workmanship for ONE YEAR
from the date of purchase.
This warranty does not apply to defects arising from
misuse, abuse, negligence, accidents, normal wear-and-
tear, unauthorized repair or alteration, or lack of
maintenance. This warranty is void if the Revolution Miter
Gauge is located or has been used outside of the country
where the authorized SawStop distributor from whom
the product was purchased resides.
Please contact SawStop to take advantage of this
warranty. If SawStop determines the Revolution Miter
Gauge is defective in material or workmanship, and not
due to misuse, abuse, negligence, accidents, normal
wear-and-tear, unauthorized repair or alteration, or lack
of maintenance, then SawStop will, at its expense and
upon proof of purchase, send replacement parts to the
original retail purchaser necessary to cure the defect.
SawStop disclaims any and all other express or implied
warranties, including merchantability and fitness for a
particular purpose. SawStop shall not be liable for death,
injuries to persons or property, or incidental,
consequential, contingent or special damages arising
from the use of this Revolution Miter Gauge.
|
4 Revolution Miter Gauge Owner's Manual
This warranty gives you specific legal rights. You may
have other rights which, in the United States, vary from
state to state.

SAFETY

Be sure to wear hearing protection, eye
l
protection, and follow all normal shop safety
practices at all times.
Before starting any cutting/milling operations
l
with your Revolution Miter Gauge, always
securely tighten the large vertical grip/handle
first.
Never let the saw blade or cutter in your
l
machine come in contact with any component of
your Revolution Miter Gauge. Verify that nothing
but the material you intend to cut or mill is in
the path of the blade before turning on the tool.
Always take care to keep your hands clear of
l
blade or cutter of the tool that you've chosen to
use your miter gauge with.
When using the flip stop accessory to position a
l
workpiece for cutting/milling operations, always
hold or otherwise secure the board against the
miter gauge fence as you guide the workpiece
past the cutter or blade.
After re-positioning the fence, be sure the two
l
knurled, silver thumbscrews that secure the
fence to the body of the miter gauge are
sufficiently tightened.
The scope of this manual does not include
instructions for the machine you are using the
Revolution Miter Gauge with. These instructions
assume you are competent and qualified in the
safe and proper operation of the machinery you
have chosen to accessorize with this miter gauge.