DFI CS632 User Manual page 69

Step 3: Create a RAID Volume
1. Go to the "Advanced" menu of the AMI BIOS and select "Intel(R) Rapid Storage Technol-
ogy".
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Main Advanced Chipset Security Boot Save & Exit
X RC ACPI Settings
X CPU Configuration
X Power & Performance
X PCH-FW Configuration
X Trusted Computing
X NCT6116D Super IO Configuration
X NCT6116D HW Monitor
X Serial Port Console Redirection
X USB Configuration
X CSM Configuration
X Network Stack Configuration
X Intel(R) Rapid Storage Technology
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
2. The screen displays all available drives. Select "Create RAID volume" to create a RAID
volume".
3. Use the up or down arrow keys to select the RAID level and press <Enter>.
4. Use the up or down arrow keys to scroll through the list of hard drives and press <En-
ter> to select the drive.
5. Press <Enter>.
6. Use the up or down arrow keys to select the strip size and press <Enter>.
7. Enter the volume size and press <Enter>.
8. At the prompt, press <Y> to confirm volume creation.
User's Manual | CS632
Step 4: Install the Intel Rapid Storage Technology Utility
The Intel Rapid Storage Technology Utility can be installed from within Windows. It allows RAID
volume management (create, delete, migrate) from within the operating system. It will also dis-
play useful SATA device and RAID volume information. The user interface, tray icon service and
monitor service allow you to monitor the current status of the RAID volume and/or SATA drives.
It enables enhanced performance and power management for the storage subsystem.
T h i s f o r m s e t a l l o w s t h e
user to manage RAID vol-
umes on the Intel(R) RAID
Controller
→←: Select Screen
↑↓: Select Item
Enter: Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
Chapter 5
RAID
68