DFI CS632 User Manual page 62

MEBX Intel(R) AMT Configuration
X X
DHCP Mode
Select Enabled or Disabled then press Enter. Please make sure there is a DHCP server in the
network when this field is enabled.
Intel(R) Management Engine BIOS Extension v12.0.0.0010/Intel(R) ME v12.0.40.1433
Copyright(C) 2003-17 Intel Corporation. All Rights Reserved
WIRED LAN IPV4 CONFIGURATION
DHCP Mode
Disabled
Enabled
[↑↓] =Move Highlight <Enter> =Complete Entry [Esc] =Discard Changes
When DHCP is Disabled, please manually input a static route by configuring the fields as
shown below.
Intel(R) Management Engine BIOS Extension v12.0.0.0010/Intel(R) ME v12.0.40.1433
Copyright(C) 2003-17 Intel Corporation. All Rights Reserved
WIRED LAN IPV4 CONFIGURATION
DHCP Mode
IPV4 Address
Subnet Mask Address
Default Gateway Address
Preferred DNS Address
Alternate DNS Address
<Enter> =Complete Entry [Esc] =Discard Changes
User's Manual | CS632
Network Setup TCP/IP Settings
X X
<Enabled>
<Disabled>
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
IPv4 Address
Assign a valid and available IP address to the system. Insert a value from 0.0.0.0 to
255.255.255.255 in IPv4 format.
IP address (e.g. 123.123.123.100)
0.0.0.0
Subnet Mask Address
Insert a value from 0.0.0.0 to 255.255.255.255 in IPv4 format.
Subnet mask (e.g. 255.255.255.0)
0.0.0.0
Default Gateway Address
Insert a value from 0.0.0.0 to 255.255.255.255 in IPv4 format.
Default Gateway address
0.0.0.0
Preferred DNS Address
Insert a value from 0.0.0.0 to 255.255.255.255 in IPv4 format.
Preferred DNS address
0.0.0.0
Alternate DNS Address
Insert a value from 0.0.0.0 to 255.255.255.255 in IPv4 format.
Alternate DNS address
0.0.0.0
Chapter 4
INTEL AMT SETTINGS
61