DFI CS632 User Manual page 34

Internal I/O Connectors Expansion Slots
X X
Please follow the steps below to install the card into the socket.
User's Manual | CS632
Step 1:
Insert the card into the socket at an
angle while making sure the notch
and key are perfectly aligned.
Step 2:
Press the end of the card far from
the socket down until against the
stand-off.
Step 3:
Screw tight the card onto the stand-
off with a screw driver and a stand-
off screw until the gap between
the card and the stand-off closes
up. The card should be lying paral-
lel to the board when it's correctly
mounted.
Chapter 2
HARDWARE INSTALLATION
33