Power-On Select - DFI CS632 User Manual

Jumper Settings
X

Power-on Select

Power of the system can be turned on via the Power Button or via the AC-In signal. Switch the
setting by putting the jumper caps on neighboring pins of JP11 as listed and illustrated below:
1 2 3
„ 1-2 On: Power Button (default)
Note:
JP11 is an optional feature and may not be present on your motherboard.
User's Manual | CS632
JP11
1 2 3
„ 2-3 On: AC In
Chapter 2
HARDWARE INSTALLATION
18