Boot; Save & Exit - DFI CS632 User Manual

X Boot
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Main Advanced Chipset Security

Boot

Save & Exit
Boot Configuration
Setup Prompt Timeout 1
Bootup NumLock State [Off]
Quiet Boot [Enabled]
Boot Option Priorities
[Disabled]
BGRT Logo
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
Setup Prompt Timeout
Set the number of seconds to wait for the setup activation key. 65535 (0xFFFF) denotes indefi-
nite waiting.
Bootup NumLock State
Select the keyboard NumLock state: On or Off.
Quiet Boot
This section is used to enable or disable quiet boot option.
Boot Option Priorities
Rearrange the system boot order of available boot devices.
BGRT Logo
It is used to enable or disable to support display logo with ACPI BGRT table.
Note:
If "Boot option filter" of "CSM Configuration" is set to "UEFI and Legacy" or "UEFI
only" and "Quiet Boot" is set to enabled, "BGRT Logo" will show up for configura-
tion. Refer to the Advanced > CSM Configuration for more information.
User's Manual | CS632
X Save & Exit
Main
The number of seconds Save Options
that the firmware will wait Save Changes and Reset
before booting the original Discard Changes and Reset
default boot selection. Restore Defaults
Boot Override
► Save Setting to file
► Restore Setting from file
→←: Select Screen
↑↓: Select Item
Enter: Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
Save Changes and Reset
To save the changes, select this field and then press <Enter>. A dialog box will appear. Select
Yes to reset the system after saving all changes made.
Discard Changes and Reset
To discard the changes, select this field and then press <Enter>. A dialog box will appear. Se-
lect Yes to reset the system setup without saving any changes.
Restore Defaults
To restore and load the optimized default values, select this field and then press <Enter>. A dia-
log box will appear. Select Yes to restore the default values of all the setup options.
Boot Override
Move the cursor to an available boot device and press Enter, and then the system will immedi-
ately boot from the selected boot device. The Boot Override function will only be effective for
the current boot. The "Boot Option Priorities" configured in the Boot menu will not be changed.
► Save Setting to file
Select this option to save BIOS configuration settings to a USB flash device.
► Restore Setting from file
This field will appear only when a USB flash device is detected. Select this field to restore set-
ting from the USB flash device.
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Advanced Chipset Security Boot Save & Exit
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
Chapter 3
BIOS SETTINGS
R e s e t t h e s y s t e m a f t e r
saving the changes
→←: Select Screen
↑↓: Select Item
Enter: Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
50