Type 3323, 3324, 3325
Basic functions
13
BASIC FUNCTIONS
The basic functions are set using the DIP switch position.
DIP switch
1
Enable or disable safety position
Set safety position and effective
2
direction (NC and NO)
3
Switches between AUTOMATIC and
4
Tab. 27:
Overview of basic functions
13.1
Changing the operating state, AUTOMATIC, MANUAL
Factory setting: Devices in their factory default state have their operating state preset to MANUAL.
DIP switch 4, which is located under the blind cover, is used to change operating state.
→
To unlock the blind cover, turn it anticlockwise and remove.
Devices with ATEX approval or IECEx approval are secured with a magnetic lock.
The removal of the cover is described in the supplementary instructions for the electromotive control
valves with ATEX approval and IECEx approval.
Fig. 49:
Setting the operating state
→
Set the operating state with DIP switch 4.
Operating state
AUTOMATIC:
DIP 4 down
→
Close the blind cover.
Basic function
Not assigned
MANUAL mode.
DIP switch
Unlock
blind cover
DIP 4: Operating state
DIP switch
MANUAL:
DIP 4 up (ON)
English
77