Ports - xFusion Digital Technologies FusionServer G5500 V7 Technology White Paper

FusionServer G5500 V7 Server
Technical White Paper
Silkscreen

5.1.3 Ports

Port Positions
●
Issue 02 (2023-12-13)
Indicators
and Buttons
FlexIO card
presence
indicator
iBMC direct
connect
management
port indicator
24 x 3.5" drive configuration
Copyright © xFusion Digital Technologies Co., Ltd.
Description
Indicates whether the FlexIO card is detected.
● Off: The OCP 3.0 NIC is not in position.
● Blinking green at 0.5 Hz: The OCP 3.0 NIC is
in position but is not powered on.
● Blinking green at 2 Hz: The OCP 3.0 NIC is in
position and has just been inserted.
● Steady green: The OCP 3.0 NIC is in
position, and the power supply is normal.
Indicates the status when the iBMC direct
connect management port connects to a
terminal (local PC or Android mobile phone):
● Off: No terminal is connected.
● Blinking green at short intervals for 3 seconds
and then off: The port is disabled.
● Steady green: The terminal is connected.
Indicates the status when the iBMC direct
connect management port connects to a USB
device:
● Blinking red at long intervals: The job fails or
an error is reported when the job is complete.
● Blinking green at short intervals: The job is
being executed.
● Blinking green at short intervals for 3 seconds
and then off: The port is disabled.
● Steady green: The server configuration file is
being copied from the USB device or the job
is successfully completed.
5 Hardware Description
15