Ports - xFusion Digital Technologies FusionServer CH242 V5 Manual

FusionServer CH242 V5 Compute Node
Technical White Paper
Sign
UID
HLY

5.1.3 Ports

Port Positions
Figure 5-3 Ports on the front panel
1
2022-08-12
Indicator and
Button
UID
button/indicator
Health status
indicator
USB port
Description
the device.
⚫
When the power indicator is steady yellow, you
can press this button to power on the device.
The UID button/indicator helps identify and locate a
device.
UID indicator:
⚫ Off: The device is not being located.
⚫
Blinking or steady blue: The device is being
located.
UID button description:
⚫
You can control the UID indicator status by
pressing the UID button or by using the iBMC or
MM910.
⚫ You can press this button to turn on or off the
UID indicator.
⚫
You can press and hold down this button for 4 to
6 seconds to reset the iBMC.
⚫ Off: The device is powered off or is faulty.
⚫
Blinking red at 1 Hz: A major alarm has been
generated for the device.
⚫ Blinking red at 5 Hz: A critical alarm has been
generated for the device, or the device is not
securely installed.
⚫
Steady green: The device is operating properly.
2
5 Hardware Description
-
15