Precautions; Precautions About The Equipment - Hitachi HF-W7500 65 Instruction Manual

Industrial computer
Hide thumbs Also See for HF-W7500 65:
Table of Contents

Advertisement

PRECAUTIONS

1. PRECAUTIONS ABOUT THE EQUIPMENT

Before you move this equipment, make sure you shut down the OS, disconnect
the plug of the power cord from the outlet and wait for at least one minute. If
you do not, the HDDs and other devices may fail.
When you transport or carry the equipment, pack it in a dedicated container
(the container and packing materials used when the equipment was delivered).
If you use other container or packing materials, that may damage the
equipment.
Do not use damaged or broken dedicated container when you transport or
carry the equipment. If you do, that may damage the equipment.
Due to the property of inrush current restraint method with this equipment,
inrush currents may increase than usual if the power is turned on before the
power supply unit has sufficiently cooled off naturally after the power has been
turned off. Before you turn on the power again, wait at least one minute after
you have turned off the power. Otherwise, the inrush currents may affect the
breaker connected to the equipment and also the life span of the equipment
itself.
(1) TRANSPORTING THE EQUIPMENT
<Required actions>
・When you transport or carry the equipment, pack it in a dedicated container (the
container or packing materials used when the equipment was delivered). When you
transport or carry the equipment in a chassis, protect the equipment so that any vibration
and shock the equipment is subjected to is within the specifications provided.
・Keep a dedicated container (the container or packing materials used when the equipment
was delivered). You can then use them later when the equipment is transported or
carried.
(2) INTERFACE CABLES
<Precautions>
・Do not pull on a cable with excessive force.
・In order to meet the EMC standards
cables (display interface cable, keyboard interface cable, and mouse interface cable)
connected to the equipment.
<Required actions>
・Route the cables in a neat and orderly manner alongside the device so that those cables
do not catch on hands or feet. If the power cord is disconnected during operation of the
equipment and the power is lost, crucial data stored on the hard disk may be break.
NOTICE
, use shielded cables for the interface
(FCC, CE, VCCI)
C-1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hf-w7500 60

Table of Contents