Figure 6-5 Installing A Main Memory; Table 6-3 Main Memory Combination List - Hitachi HF-W7500 65 Instruction Manual

6. CHECKUP AND MAINTENANCE
[3] Make sure the lock on both ends of the connector of the memory slot is open.
[4] Insert the main memory into the connector from directly above the connector.
When the main memory is inserted, you will hear a click and it is locked. Make sure the
lock is completely closed.
On this equipment, only the following combinations are allowed.
The number of
main memory
2
4
4
(3) Removing main memory
Follow the procedure described in "(2) Installing a main memory" in reverse to remove main
memory. Also, be careful when opening locks at both ends of the connector of the memory slot
at the same time, a main memory will be disconnected from the memory slot.
(4) Reconfiguring the memory dump file settings
When you change the capacity of main memory, you must reconfigure the memory dump
collection settings.
When you reconfigure the memory dump collection setting, see "8.2.1 Memory Dump
Confirmation Message" for details.
Memory slot B2
Memory slot B1
Memory slot A2
Memory slot A1

Figure 6-5 Installing a main memory

Table 6-3 Main memory combination list

Memory slot Memory slot
A1 A2
－
8GB
8GB 8GB
16GB 16GB
Memory slot
B1
－
8GB
16GB
6-14
Side view
Top view
Memory slot Total
B2 capacity
8GB 16GB
8GB 32GB
16GB 64GB