Dvds - Hitachi HF-W7500 65 Instruction Manual

5. DVDs

(1) Handling the DVD Drive
<Precautions>
・The DVD drive is subject to damage by dust. Install the equipment in a place with
minimum dust and clean up around the equipment regularly.
When you use insecticide sprays, or the like, cover the equipment with a protective sheet
or covering beforehand.
・Do not subject the equipment to a strong shock while the DVD drive is in use.
・Do not open the tray except when you insert or eject an Optical disc. Do not put foreign
objects into the tray. If you do, the DVD drive may be damaged or fail.
・When you put an Optical disc on the disc tray, make sure that the disc is properly set on
the disc tray. If not, the disc may be forced out of the tray while the tray is loaded.
<Specifications>
・Depending on the type of Optical disc used, you may not be able to read or write to the
disc. In this case, use another Optical disc.
・Depending on the condition of an Optical disc (whether it has scratches, dust, is
deformed, has copy protection enabled, and so on) , you may not be able to read or write
to the Optical disc properly.
・Writing to an optical disc is not supported because the quality of an Optical disc might
prevent data from being written to that disc. Before using the writing function, in
advance, verify the Optical disc to be used.
(2) Handling Optical disc
<Precautions>
・Do not apply benzene, thinners, water, record cleaner, anti-static liquids, or use a
silicone cloth on an Optical disc.
・Do not use a dryer when you remove dust or moisture from an Optical disc.
・Do not store Optical disc in a location with high temperature and humidity.
・Do not store Optical disc in a location not subject to direct sunlight, strong artificial
light, and the like.
・Do not fold or bend an Optical disc.
・Do not write or scratch on the recording surface of an Optical disc.
・Do not insert a stick into a center hole of an Optical disc and spin the Optical disc.
・Do not put stickers, labels, or decals on an Optical disc.
C-9