6. CHECKUP AND MAINTENANCE
6.3.9 Attaching and removing rubber feet
(1) Before attaching and removing rubber feet and cover screws
・Before starting to work, see "6.3.2 Before installing or removing components".
(2) Removing rubber feet
[1] Insert the blade of a slotted screwdriver into the center part of a mounted rubber foot.
[2] Gradually pry up the cap at the center of the rubber foot by gently pushing the handle of
the driver toward the bottom plate of the equipment.
Figure 6-13 Removing a Rubber Foot
6-22
[1]
Cap
Slotted screwdriver
[2]
Slotted screwdriver