Sensor-Independent Settings; Changing The Sensor-Independent Settings; Energy Saving (Battery Operation) - Xylem SI Analytics Lab 855 Operating Manual

Lab 855
List of sensor-independent settings
Automatic switch-off function
ba77143e02 12/2017
Displayed
(Confirm with
<ENTER>)
U rES
Unit
7.3

Sensor-independent settings

7.3.1

Changing the sensor-independent settings

1. Open the menu for the sensor-independent settings with <ENTER__>.
The first setting is displayed.
2. To change the current setting, press <><>.
3. Confirm the setting with <ENTER>.
The settings are finished.
The meter switches to the measuring mode.
Default settings are printed in bold.
Displayed
(Confirm with
<ENTER>)
t.Off 10, 20, 30, 40, 50 min,
1, 2, 3, 4, 5, 10, 15, 20, 24 h
7.3.2

Energy saving (battery operation)

The meter has an automatic switch-off function to avoid unnecessary power
consumption during battery operation.
The energy saving feature switches off the meter during battery operation if no
key is pressed during the adjusted interval.
The automatic switch-off function is not active when the power pack is
connected.
The switch-off interval is set with the system settings (see section 7.3
S -
ENSOR INDEPENDENT SETTINGS
Possible setting
(Change with
<><>)
0.0 Resolution of the voltage display
0
°C Temperature unit
°F
Possible setting
(Change with
<><>)
, page 31).
Settings
Description
Description
Switch-off interval (see sec-
tion Automatic switch-off
function, page 31)
31