Operation
Overview
33
3
Select and confirm the Time menu with <><> and <MENU/
ENTER>.
The hours are highlighted.
4
Change and confirm the setting with <><> and <MENU/
ENTER>.
The minutes are highlighted.
5
Change and confirm the setting with <><> and <MENU/
ENTER>.
The seconds are highlighted.
6
Change and confirm the setting with <><> and <MENU/
ENTER>.
The time is set.
7
If necessary, set the Date and Date format. The setting is made
similarly to that of the time.
8
To make further settings, switch to the next higher menu level
with <ESC>.
or
Switch to the measured value display with <M>.
The instrument is in the measuring mode.
4.4
Sensor-independent settings
The Storage & config menu includes the following settings:
System (see section 4.4.1).
Data storage (see section 4.4.2)
4.4.1 System
The following sensor-independent meter characteristics can be
adjusted in the Storage & config/System menu:
Menu language
Beep on keystroke
Loudness of the beep
Illumination
Brightness
Interval of the automatic switchoff
Data interface
Clock and date function
Reset of all sensor-independent system settings to the default con-
dition
Multi 3430
ba75865e19
04/2015