Xylem SI Analytics Lab 855 Operating Manual page 33

Lab 855
ba77143e02 12/2017
The following settings are reset to the delivery condition (default):
• Measurement settings
• System settings
• Calibration data
Recalibrate after performing a reset.
Measurement and system settings that can be reset
Measurement settings
Display during calibration (bUFF )
Unit of the value for the slope (SLO ) mV/pH
Unit of the value for the zero point
(ASY )
Measured value resolution (pH rES) 0.000
Measured value resolution (U rES)
Unit of the measured temperature
value (Unit )
Calibration interval (Int.C )
System settings
Switch-off interval (t.Off )
Default
pH (nominal buffer value)
mV
0.0
°C
7 d
Default
1 h
Reset
33