Maintenance - Eighteeth E-FLOW User Manual

Storage:

Before first use and after each use, clean and disinfect the above components.

Do not use anything except Ethanol (70- 80 vol% Ethanol).
 Do not use too much ethanol as it's going into machine and damage the
components inside.

Do not allow any moisture to get into the device.
6.4

Maintenance

Lubricate components
-ring
O
Check the O-ring for cracking, wear or lack of grease every time you turn the device
on.
If cracked or worn, replace it.
If dry or unlubricated, lubricate with silicone gel.
Gently apply silicone gel to the surface of the O-ring as the pushrod is extended.
To extend the pushrod, perform the following operations: Click the icon
follow the prompts.
instruction.
Storage of the processed device in a dry, clean and dust
free environment at modest temperatures, refer to label
and instructions for use.
35
and