Eighteeth E-FLOW User Manual page 34

Disinfection components
Main unit
Preparation
processing:
Cleaning:
Disinfection:
Drying:
Inspection
maintenance:
before Before cleaning and disinfecting, make sure the power is
off.
Wipe all the exterior surfaces of the components
thoroughly with a cloth lightly moistened with Ethanol (70-
80 vol% Ethanol) at least 3 min, repeat for 5 times.
Click the icon
surface of the pushrod.
Wipe all the exterior surfaces of the components
thoroughly with a cloth lightly moistened with
(70- 80 vol% Ethanol)at least 3 min, repeat for 5 times.
Click the icon
the surface of the pushrod.
Use a lint free cloth to wipe the surfaces.
and
Visual inspection for cleanliness of the components.
Functional testing according to the user manual. If
necessary, perform reprocessing process again until the
components are visibly clean.
Before packaging, make sure that the components have
been maintained according to the manufacturer's
Adapter
, extend the pushrod, clean the
, extend the pushrod, disinfect
34
Foot pedal
Ethanol