Remove The Needle Cap; After Injection - Eighteeth E-FLOW User Manual

4.2.5 Remove the needle cap

Before injection, the needle cover should be
removed as follows: Hold the Sleeve, insert the
handpiece with the needle cover into the
needle cover hole with appropriate force, and
pull out the handpiece so that the needle cover
remains in the needle cover hole .

4.3 After injection

When you have completed the injection, follow
these steps: Ensure that the pushrod is
returned to the bottom (Refer to Section
6.3.11), insert the handpiece with the needle
into the needle cover, hold the needle cover
and pull the needle cover out of the needle
cover hole.
Then remove the Sleeve with needle
anticlockwise;
Make sure the pushrod
has
bottom before removing
the needle
 Each
cartridge and needle can
only be used for one
patient.
 Dispose
anesthetics and used
needles
16
returned to
anesthetic
of used
according
the
to