Looper - Mooer PRIME P2 Owner's Manual

Looper

You can use the Looper to record loops of up to 8 minutes (480 seconds).
Adjusts the playback volume.

Starts a loop recording and starts overdub for the second layer of

the loop.
NOTE: When you tap this button for the first time, the recording will
not start before the first signal is detected at the input.
Stops the recording and plays the loop.

Stops recording or playback.

Clears (deletes) the recorded loop.

You can store up to 10 loops in "Song" slots.
After recording a loop, tap the
You can recall stored loops by tapping on the field showing the loop name and selecting one of the
10 Song slots.
NOTE: Stored loops will be deleted when you reset to factory settings.
Drum Machine synchronization:
The Looper can be synchronized with the Drum Machine.
If SYNC is active, the Drum Machine will start after a count-in when you start recording in the Looper.
To use the Sync feature:
 Open the Drum screen, select a drum pattern and a tempo and start the Drum Machine.
 Switch to the Looper screen and tap on
The Drum Machine will stop, and enter a standby-mode to wait for your loop recording.
 Tap to start recording the loop.
The Drum Machine will play one bar of count-in and then start the selected drum pattern.
 You can now use the other Looper controls as described above.
icon, specify a name and a song slot and confirm.
.
15