Table of Contents
Advertisement
Effect Page / Preset Editing
Preset selection
The P2 comes pre-configured with 80 sample presets that users
can adapt to their own taste.
The currently active preset is shown below the page tabs.
Tap on the preset name to open the preset list and select another preset. The presets are
listed according to their bank (0 - 19), their position within the bank (A - D) and their name
(defined by user).
The preset indicated in the App also changes when you switch presets on the touch screen of
your P2 or when you use the optional wireless footswitch.
If you want to switch presets after you have made changes to a preset, you need to save the
preset first by tapping the "SAVE" button behind the Preset name.
NOTE: If you do not save a preset before you switch to another preset, all changes will be
discarded without warning.
Effect Chain
The next row shows the chain of effect modules.
The signal passes the modules from left to right.
The following module types are available:
OD = 19 overdrive and distortion effects
Amp = 52 amplifier simulations + 10 GNR file slots downloaded from the cloud
Cab = 25 cabinet simulations + 10 GIR file slots downloaded from the cloud
Dyna = 4 dynamic effects (compressors, noise gates...)
Filter = 3 filter effects (Wah, Q-Filter...)
MOD = 14 modulation effects (Tremolo, Vibrato, Flanger, Phaser, Chorus, Pitch shift...)
DELAY = 9 delay and echo effects
REVERB = 6 reverb effects
EQ = 2 equalizer effects
Modules shown dimmed are not active. Modules shown in normal color are active.
Tap on a module once to select it (frame is shown around the module)
and tap it again to activate or deactivate it.
Slide the effect chain right or left to show more modules.
Tap and hold a module and drag it left or right to change its position in the effect chain.
Add a new module by tapping the "+ Add" module at the right end of the chain.
Effect selection and parameter adjustment
Tap on a module to select it (frame is shown around the module).
In the field below, tap on the name of the effect to open a list of effect
types and individual effects.
The available effects depend on the module type
(e.g. selection of 52 amp types for the AMP module).
The fields below the selected effect show typical parameters for this
kind of effect. They can be adjusted by tapping and moving the sliders.
10
Advertisement
Table of Contents
