Mooer Studio Software; Firmware Update - Mooer PRIME P2 Owner's Manual

Users can download the MOOER Studio Management
Software from the official MOOER Download-Support
Website and install it on their PC / laptop.
Use the USB-C to USB-A cable to connect your P2 to
your computer and open the MOOER Studio software.
Use the software to:
 update the firmware on your P2,
 create backups of your P2 settings and presets on your computer,
 restore backups to your P2,
manage third-party IR files.


Firmware update

NOTE: Use the MOOER Studio software to backup your settings before performing an update.
1. Press the side button for 12 - 15 seconds until the LED bar starts blinking.
2. Connect the P2 to your PC using the included USB-C to USB-A cable.
3. Open the MOOER Studio software and the update should start automatically.
You can also click "Device Update" in the software to initiate the update.
4. You can download the new App version from the Play Store / App Store.

MOOER STUDIO SOFTWARE

16