Controlling The Drum Machine - Mooer PRIME P2 Owner's Manual

B: STOP / Hold to CLEAR

The B LED is lit when Recording/Playback is stopped and off, after the track was cleared.
Song-selection

Long press footswitch C to enter the Song selection mode.
Press footswitch A or B to scroll up/down between songs
The screen shows the currently selected Song (S1 = Song 1 / S0 = Song 10) and the A and B
LED are flashing.
The Song selection mode will be deactivated after a few seconds without input.

Controlling the Drum Machine

In Drummer & Looper mode, footswitches C and D are used for drum machine control.
C: Tap Tempo.

The beats-per-minute tempo for the drum machine can be adjusted using the tap tempo
feature:
Tap button C at least 3 times to enter the desire tempo. The C LED will blink to indicate the
selected tempo and the Drum Machine screen in the Prime App shows the selected BPM
value.
D: Play/Stop. Starts/Stops the Drum Machine

 Groove selection:
Long-press footswitch C to enter the Groove selection mode.
The screen shows number of the currently selected Groove and both C and D LED are flashing.
Press switches C or D to scroll down/up between Grooves. Refer to the PRIME App for names
and numbers of the grooves.
The Groove selection mode will be deactivated after a few seconds without input.
19