Mooer MOD FACTORY PRO - Dual Engine Modulation Pedal Manual

Precautions

PLEASE READ CAREFULLY BEFORE PROCEEDING

Power Supply
Use the correct AC outlet to connect the power adapter. Use a power transformer with a negative external voltage of 9V (± 10%) ≥300mA, otherwise it will cause equipment damage, fire or other problems. When unused or thunderstorms please unplug the power supply.

Connections
Before connecting the device or disconnecting it, be sure to turn off the power and other equipment, which will help to avoid malfunction and damage to other equipment. Also, make sure that all cables and power cords are disconnected before moving the unit.

Place the place
To prevent deformation, discoloration, and other serious damage, avoid the following:

• Direct sunlight
• Magnetic field
• Dusty or unclean place
• Strongly vibrating or shaking
• Near heat source
• High temperature and humidity
• Humidity is large

Electrical interference
When using the unit, the radio and the TV may cause interference. Use the unit away from the radio and the TV.

Clean
Please use a dry, soft cloth to clean the unit. If necessary, wipe with a slightly moist cloth. Do not use rough clean powder, alcohol, paint thinner, wax, solvent, detergent and chemical agents such as impregnated wipes.

Operating
Do not use brutal forces to use switches and control elements.

Do not allow paper, metal, and other objects to fall into the machine.

Be careful not to fall, do not subject it to shock and excessive pressure.

FCC certification

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

• This device may not cause harmful interference.
• This device must accept any interference received, including interference that may cause undesired operation.

Main Features

• 2 Independent processing modules containing a total of 16 modulation effects
• Adjustable signal chain routing
• Store and recall up to 4 user presets
• Tap Tempo functionality
• Expression pedal expandability
• Leslie style ACCELERATION pedal
• True stereo outputs

Device Layout

1. A.SPEED
   Adjusts the rate of MODE A
2. A.DEPTH
   Adjusts the depth/mix of MODE
3. A.CONTROL
   Adjusts various effect parameters of MODE A
4. B. SPEED
   Adjusts the rate of MODE B
5. DEPTH
   Adjusts the depth/mix of MODE B
6. CONTROL
   Adjusts various effect parameters of MODE B
7. MODE A
   Selects the effect type for MODE A
8. ROUTING SWITCH
   Selects the internal signal chain routing (see ROUTING section of this manual)
9. STORE
   Used for saving presets (see USING PRESETS section of this manual)
10. MODE B
    Selects the effect type for MODE B
11. PRESET STATUS LED
    Displays the currently selected Preset
12. TAP TEMPO LED
    This LED will illuminate red when the PRESET FOOTSWITCH is controlling TAP TEMPO
13. EFFECT SPEED LED
    Displays the current speed of the modulation rate
14. ON/OFF LED
    Displays the ON/OFF status of the pedal
15. PRESET

• Press this footswitch to scroll through presets
• Press and hold this footswitch to activate/deactivate tap tempo
• When tap tempo is activated, press this footswitch multiple times to control the speed of the modulation rate

16. ON/OFF

• Press this footswitch to turn the pedal on/off
• Press and hold this footswitch to activate effect acceleration

17. DC IN
    Connect to a 9VDC power source
18. RIGHT OUTPUT

• Connect to the input of your amplifier using a standard 1/4" jack cable
• When used in stereo this output provides the Right Channel. When used in MONO this output provides DSP BYPASS

19. LEFT OUTPUT

• Connect to the input of your amplifier using a standard 1/4" jack cable
• When used in stereo this output provides the Left Channel. When used in MONO this output provides TRUE BYPASS

20. EXP
    Connect to an external expression pedal using a 1/4" TRS stereo jack cable
21. INPUT
    Connect to the output of your instrument using a standard 1/4" jack cable

Routing

MOD FACTORY PRO contains 2 independent Modulation modules (MODE A/MODE B) which can operate individually or simultaneously. The internal signal chain routing of the pedal can be adjusted using the ROUTING SWITCH.

1. Serial MODE A > MODE B
   The signal will first go to MODE A and then to MODE B
   When using this routing the TAP TEMPO controls the rate of MODE A
   
2. Serial MODE B > MODE A
   The signal will first go to MODE A and then to MODE B
   When using this routing the TAP TEMPO controls the rate of MODE B
   
3. PARRALLEL

• The signal will first be split into 2 and then go to MODE A and MODE B simultaneously
• The signal will then exit both effect modules and be mixed together before reaching the outputs of the pedal
  
• When using Parrallel routing you can simulate a dry through WET/DRY setup by disabling one of the effect modules. To achieve this simply set either MODE A or MODE B to the 'Off' position.
• Try setting MODE A to 'Off' and 'MODE B' to Vibrato whilst in PARRALLEL routing to discover a very cool chorus type effect.
  

Using Presets

MOD FACTORY PRO can store 4 presets which can be scrolled through live using the PRESET footswitch. When you save a preset the pedal will store all of your parameter value, routing and expression pedal settings.

The PRESET STATUS LEDs display which preset is currently selected. When the RED LED is highlighted (on the far left) MOD FACTORY PRO is in pedal mode. This means that all parameter values will be equal to their respective controls physical position.

To scroll through presets, press and release the PRESET footswitch

To store a preset

• Make all settings you wish to save
• Press the STORE button once and the preset LED will begin to flash
• Select the preset space where you wish to store your settings by pressing the PRESET footswitch
• Press the STORE button one more time to confirm or move any control on the pedal to cancel the storage procedure

Connections

Expression Pedal

Expand the live performance experience of your MOD FACTORY PRO by using it with an expression pedal. The expression pedal can be set to control any one single parameter of the MOD FACTORY PRO.

• Connect your expression pedal to the EXP input of the MOD FACTORY PRO using a 1/4" trs stereo Jack cable.
• Simultaneously rotate the control knob of the parameter you wish to set to the EXP and rock the pedestal of your expression pedal back and forth
• Now you have successfully set the expression pedal to control a parameter of the MOD FACTORY PRO

Specifications

Input: 1/4 "mono jack (impedance 1M Ohms)
Output: 1/4 "mono jack x2 (impedance 100 Ohms)
Sampling rate: 44.1K
Sampling accuracy: 24bit
Power supply: 9V 300mA DC power supply (centre pin negative)
Power consumption: 250mA
Size: 106mm (D) X96mm (W) X53mm (H)
Weight: 400g

* Disclaimer: Specification update is subject to change without notice.

MOOER AUDIO CO.,LTD
www.mooeraudio.com

Documents / Resources

References

• MOOER Audio

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Mooer MOD FACTORY PRO - Dual Engine Modulation Pedal Manual