Footswitch Control; Midi Control - Mooer PRIME P2 Owner's Manual

 The device may get warm during charging or regular use. This is normal and does not affect
the functions. Pease avoid using the device in high-temperature environments.

Footswitch control

The Prime P2 supports the MOOER F-series wireless
footswitches (purchase separately).
The footswitch can be used to control several functions of
the P2 such as Preset and Bank selection, Tuner access,
Drum Machine and Looper control or Tap-Tempo input.
Before using the wireless footswitch for the first time, it
must be paired with the P2. Please see section WIRELESS
FOOTSWITCH for further instructions.

MIDI Control

Preset switching, Looper and Drum Machine functions of
the P2 can be controlled using CC commands from an
external MIDI controller.
Use the included MIDI adapter cable (3.5 mm  5 PIN
connector) to connect a controller to the MIDI jack on the
side of the P2.
See section MIDI Settings in the PRIME App for instructions about assigning MIDI commands to P2
functions.
8