Matrox 4Sight XV6 Installation And Hardware Reference page 69

Matrox 4Sight XV6 Windows 10 IoT Enterprise configuration utility 69
The RECOVERY partition houses the Matrox 4Sight XV6 Rescue utility and
factory image, and does not get reformatted if you restore an OS backup .wim file
from the Matrox Rescue utility console. However, if you use a rescue USB key
with a capture-for-deployment backup .wim file (W10XV6.wim), then both the
RECOVERY and SYSTEM partitions are reformatted and restored to their
original factory-configured state with the original software provided by Matrox.
To perform any of the backup, capture, or restore tasks, you must access your
Matrox 4Sight XV6 directly since remote desktop is not available in the recovery
environment. To access the unit directly, connect a display device, keyboard, and
mouse to your Matrox 4Sight XV6. For information, refer to Connecting
peripheral devices section, in Chapter 2: Getting started with your
Matrox 4Sight XV6 unit.
For the latest information on backup, capture, and restore features, refer to the
OSreleasenotes.txt file, found on the C: drive of your Matrox 4Sight XV6.