Sata3 Data Connectors For Mass Storage Devices; Internal Usb 2.0 Headers - Matrox 4Sight XV6 Installation And Hardware Reference

SATA3 data connectors for mass storage devices

The eight SATA3 data connectors are 7-pin, male connectors. They can be used
for mass storage devices. SATA3 connector 1 is disabled when a drive is connected
to the M.2 M-Key connector. The pinout for the SATA3 connectors is available
at the website of the Serial ATA International Organization,
http://www.sata-io.org.

Internal USB 2.0 headers

The three USB 2.0 headers are 9-pin male connectors. One header is already used
by the USB 2.0 connectors on the exterior of the unit. Each USB 2.0 header
supports two ports; you can use a custom adapter bracket with two USB 2.0
connectors to access these from the exterior of the unit.
Matrox 4Sight XV6
Pin Signal
1 USB power
2 USB power
3 PA-
4 PB-
5 PA+
6 PB+
7 GND
8 GND
10 N/A
Back of
USB 5-6
connector group 15
Descriptions of internal connectors
2 4 6 8 10
1 3 5 7
USB 7-8 USB 9-10
63