Matrox 4Sight XV6 Installation And Hardware Reference page 47

• One serial port connector on the outside of the unit; you can connect a device
through either the RS-232, RS-422, or RS-485 standard. There are also five
additional RS-232 serial port headers available on the motherboard inside the unit.
• One PS/2 (keyboard or mouse) port. You can connect a keyboard or a mouse that
uses a PS/2 port.
• Support for stereo audio input, output, and a microphone.
• Four PCIe 3.0 slots.
Slot # Description
1
PCIe 3.0 x16
2 PCIe 3.0 x4 (open-ended)
3 PCIe 3.0 x8 * (mechanically x16)
4 PCIe 3.0 x4 (open-ended)
*. The first PCIe 3.0 x16 connector (slot 1) will operate at a x8 width when a board is present in the second PCIe 3.0 x16
connector (slot 3). The second PCIe 3.0 x16 connector (slot 3) is electrically wired as a PCIe x8 slot, so PCIe x16 boards
will operate at a maximum of PCIe x8.
• One mini-PCIe slot. Can be used to connect full and half sized PCIe x1 boards
and USB 2.0 devices.
• Two M.2 sockets. One is E-Key with support for PCIe x1, CNVI, and USB 2.0
for wireless. The second is M-Key and is used to connect the 120 GB SSD.
• Four 288-pin Long-DIMM slots supporting dual-memory channel
DDR4-2400/2666 Mbps RAM. Each slot supports a memory module up to
16 Gbytes in size.
• Eight SATA3 data connectors. One SATA3 data connector is shared with the M.2
M-Key socket.
2. The external 2.0 USB connectors are connected to one of the internal USB 2.0
headers.
*
(only x8 if slot 3 is used)
Summary 47