Table of Contents
Advertisement
To recall a capture combination, it is not necessary to open the capture memory with key
switch MEMORY LOCK.
Except on instruments with wooden drawstops, stops can be added or switched off
manually in a recalled registration.
Non-lighted capture system
In a non-lighted capture system, a capture combination is recalled as follows:
1. Determine which capture combination has to be recalled (e.g. M2-3).
2. Select the memory group (e.g. M2).
3. Next select the memory location (press piston 3).
Lighted capture system with 7-segment display
In a lighted capture system with 7-segment display, a capture combination is recalled as
follows:
1. Determine which capture combination has to be recalled (e.g. M2-3).
2. Select the required memory group with e.g. the – and the + pistons. The selected
memory group is shown on the display.
3. Next select the required memory location (press piston 3).
Lighted capture system with LCD
In a lighted capture system with LCD, a capture combination is recalled as follows:
1. Determine which capture combination has to be recalled (e.g. M2-3).
2. Select the required memory group with the – and the + pistons. The selected memory
group is shown on the display.
M e m :
T r a n s :
3. Next select the required memory location (press piston 3).
User's Manual
2
2
V o l : 1 2
T u n e : 4 4 0
0
C r e s c e n d o : O f f
JOHANNUS
JOHANNUS
JOHANNUS
JOHANNUS
44
Monarke
Advertisement
Table of Contents
