Lcd-Display - Johannus Monarke User Manual

The display has various functions:
! When the GC-piston is not pressed, the display will show the selected memory group
of the capture system.
See also at "Using the capture system".
! When the GC-piston is pressed, the display will show to which step the general
crescendo pedal is pressed down.
See also at "Using the general crescendo".
! When the thumb pistons GC and PG(M) are pressed, the display will show which step
of the general crescendo can be programmed.
See also at "Using the general crescendo".
! When the PGM-piston is pressed and a MIDI-stop is switched on, the display will show
which channel / module voice number (patch number) is assigned to the concerned
MIDI-stop.
See also at "Programmable MIDI"

LCD-display

This type of display (LCD stands for Liquid Crystal Display) will show various settings:
! Selected capture memory group (Memory from 1 to 8 inclusive).
See also at "Using the capture system".
M e m :
T r a n s :
! Volume setting (Volume from 1 to 25 inclusive).
See also at "General volume".
M e m :
T r a n s :
! Pitch setting (Tune from 426Hz to 454Hz inclusive).
See also at "Fine tuning".
M e m :
T r a n s :
! Transposer setting (Transposer from –3 to +3 inclusive half tones).
See also at "Transposer".
M e m :
T r a n s :
User's Manual
1 V o l : 1 2 T u n e : 4 4 0
0 C r e s c e n d o : O f f
1 V o l : 1 2 T u n e : 4 4 0
0 C r e s c e n d o : O f f
1 V o l : 1 2 T u n e : 4 4 0
0 C r e s c e n d o : O f f
1 V o l : 1 2 T u n e : 4 4 0
0 C r e s c e n d o : O f f
JOHANNUS JOHANNUS JOHANNUS JOHANNUS
29
Monarke