General Crescendo System With Lcd - Johannus Monarke User Manual

General crescendo system with LCD

The standard stop combinations of a general crescendo system with LCD can be restored
as follows:
1. 'Open' the general crescendo memory by turning key switch MEMORY LOCK a quarter
of a turn to the right. The SET-piston will now light up, as a sign that the general
crescendo memory is 'open' again.
2. Press the thumb pistons GC and PG(M). The display will now show a 0 (step 0, or all
the stops of the general crescendo off).
M e m :
T r a n s :
All the stops will be switched off. Changing the position of the general crescendo pedal
will have no effect.
3. Press the 0-piston (keep pressing it) and then briefly press the SET-piston. The display
will, for a second, show the letter P as a sign that the standard stop combinations are
being restored (programmed) into the general crescendo memory.
M e m : P 6
T r a n s :
4. First release the SET-piston and only then the 0-piston.
5. 'Close' the general crescendo memory by turning key switch MEMORY LOCK a quarter
of a turn to the left (taking the key from the switch, if necessary). The lamp in the SET-
piston will go off now, as a sign that the general crescendo memory is 'closed' again.
6. Again press the PG(M)-piston. The general crescendo is now ready for normal use
again.
User's Manual
1 V o l : 1 2 T u n e : 4 4 0
0 C r e s c e n d o :
V o l : 1 2 T u n e : 4 4 0
0 C r e s c e n d o :
JOHANNUS JOHANNUS JOHANNUS JOHANNUS
49
0
0
Monarke