Table of Contents

Advertisement

5. 'Close' the memory by turning key switch MEMORY LOCK a quarter of a turn to the left
(taking the key from the switch, if necessary ). The lamp in the SET-piston will now go
off, as a sign that the memory is 'closed' again.
The pitch setting is now stored into the memory. When the instrument is switched on again,
the pitch setting programmed into the memory will be automatically selected.

Transposer

With the selector switch TRANSPOSER or by means of the thumb pistons TRANS., SET,
– and +, the instrument can be transposed. This means that the instrument can be tuned
a number of fixed half tones higher or lower.
TRANSPOSER (selector switch)
With this selector switch the instrument can be set (tuned) 1, 2 of 3 fixed half tones lower
or higher. If the selector is in position 0, the instrument is at normal pitch A=440 Hz,
provided the PITCH control is in the central position.
By using the TRANSPOSER, in combination with the PITCH control, the instrument can
be tuned three half tones higher or lower continuously.
TRANS. (thumb piston, programmable)
With the thumb piston TRANS. in combination with the thumb pistons – and +, the
instrument can be set 1, 2 or 3 fixed half tones lower or higher. A transposer setting can
be stored into the memory. When the instrument is switched on, the programmed
transposer setting will automatically be selected from the memory. A programmed
transposer setting can be changed later.
The memory in which the transposer setting is stored is protected so that it not can be
erased when you switch off the organ or when unplug the organ from the main power.
The selected transposer setting is shown on the display:
M e m :
T r a n s : – 2
The transposer can be set as follows:
1. Press thumb piston TRANS.. As long as the lamp in thumb piston TRANS. keeps on
burning the transposer setting can be changed.
2. Select the required transposer setting by pressing the – or the + piston once or several
times.
3. After a few seconds the lamps of both thumb pistons TRANS. and the – or the + piston
will go off automatically.
The transposer setting is not stored into the memory now and will be lost as soon as the
instrument is switched off.
User's Manual
1
V o l : 1 2
T u n e : 4 4 0
C r e s c e n d o : O f f
JOHANNUS
JOHANNUS
JOHANNUS
JOHANNUS
35
Monarke

Advertisement

Table of Contents
loading

Table of Contents