Programming Midi-Stops With Lcd - Johannus Monarke User Manual

Table of Contents

Advertisement

Programming MIDI-stops with LCD

A MIDI-stop on instruments with an LCD, can be programmed into the capture system as
follows:
1.
Make certain that the GC-piston has not been switched on. This is to make certain that
no general crescendo step is changed inadvertently.
2.
'Open' the memory by turning key switch MEMORY LOCK a quarter of a turn to the
right. The SET-piston will now light up as a sign that the memory is 'open'.
3.
Switch on the MIDI-stop you wish to programme (e.g. MIDI SWELL 2) together with (if
required) a number of stops that have to be stored into the capture memory.
4. First store this registration into the required capture memory (see "Using the capture
system"). This can be both a capture memory of the generals and of the separates (if
present).
Note: 1. If the set registration is not stored into the capture memory, the programmed
hand registration of the MIDI-stop in question will be changed unintentionally.
2. Concerning the separates, the MIDI-stops can obviously only be programmed
into the accompanying separates. MIDI SWELL 2 can only programmed into
the separates of the swell and not into the separates of the great, for
instance.
5. Press the PGM-piston. The display will indicate which MIDI-stop has been switched on
with its current channel.
M i d i
V o i c e :
6. By pressing the – or the + piston once or several times, now select the channel you
wish to assign to the MIDI-stop to be programmed. The selected channel (from 1 to 16
inclusive) is indicated on the display.
7. After selecting the correct channel (e.g. channel 6), just press the SET-piston. The
selected channel has now been assigned to the MIDI-stop to be programmed. The
display will now indicate the current patch number belonging to the MIDI-stop.
M i d i
V o i c e :
8. By pressing the – or the + piston once or several times, now select the patch number
that is to be assigned to the MIDI-stop to be programmed. The selected patch number
(e.g. 40) is indicated on the display.
M i d i
V o i c e :
User's Manual
P r o g r a m
S w e l l
C h a n n e l :
P r o g r a m
S w e l l
1
C h a n n e l :
P r o g r a m
S w e l l
4 0
C h a n n e l :
JOHANNUS
JOHANNUS
JOHANNUS
JOHANNUS
57
2
6
6
Monarke

Advertisement

Table of Contents
loading

Table of Contents