Panasonic EYADA Series Operating Instructions Manual page 91

u2 Soft Start Speed Level Setting
The speed of soft start can be set.
The duration of soft start should be set
in " u1 Soft Start & Soft Snug Time
Setting".
P. 32
• Because of the structure of the motor,
it requires some time to increase the
speed of the soft start to the normal
speed.
■ Setting Procedure
Switch to setting mode.
Set the forward/reverse lever to
the trigger switch lock position, and
hold down the OK button.
Choose "u2" by pressing
the ▲ and ▼ buttons, and
press the OK button.
A set value appears on the display.
Soft start speed level (Rotations/minute)
Display
EYADA218XC
EYADA212XC
EYADA407XC
* Relative to the maximum
number of rotations
Display
EYADA218XC
EYADA212XC
EYADA407XC
* Relative to the maximum
number of rotations
• The values (numbers of rotations) are only guidelines.
P. 22
Level1 Level2
450
300
160
About 25%
Level6 Level7
1200
800
430
About 75%
When it is set to "04"
Select a desired one by
pressing the ▲ and ▼
buttons.
The default is "10".
Press the OK button to
confirm it.
When the setting is completed, a
buzzer sounds long (a long beep),
and the display returns to the menu
screen.
Back to Operation Mode.
Hold down the OK button.
Level3
600 750
400 500
220 270
Level8
1350 1500
900 1000
490 540
During the time set
in soft start, a screw
is fastened slowly
at about 50% of the
maximum speed.
P. 22
Level4 Level5
900
600
330
About 50%
Level9 Level10
1650
1100
600
About 100%
1050
700
380
1800
1200
650
33
EN