Panasonic EYADA Series Operating Instructions Manual page 115

Setting Buzzer (Volume) for
Count-up (Count Complete) .......... 40
Setting Buzzer Pattern for
Count-up (Count Complete) .......... 39
Setting Drive Permission for
External Input ................................ 42
Setting Fastening Torque .................... 18
Setting Lighting Colour of
Detection Lamp ............................. 39
Setting Lighting Pattern
of Detection Lamp for
Problem Occurrence ..................... 40
Setting Number of Screws to Fasten .. 25
Setting Screws Not to Be
Counted If Fastened Again
after Fastening OK ........................ 30
Setting Speed of Soft Snug ................ 34
Setting Speed of Soft Start ................. 33
Setting the Tool Not to Start
during the Set Time after
Fastening OK ................................ 37
Soft Snug ............................................ 32
Soft Start............................................. 32
Stopwatch Mode ................................. 38
Switch to Setting Mode ....................... 22
Switching Rotation Direction of
Electric Screwdriver ...................... 20
Switching Start Modes ........................ 17
T
Trigger Switch Lock ............................ 13
U
Using Forward/Reverse Lever ............ 13
W
When Connecting to PLC ................... 44
57
EN