Panasonic EYADA Series Operating Instructions Manual page 86

COUNT MENU (c + NUMBER)
c4 Quantity Reset Permission Setting
A manual reset of the count quantity is
permitted.
When it is set to "_1", you can reset
the count by holding down the ▼ and
▲ buttons at the same time, without
having to wait for the end of the quantity
specified in the count quantity setting.
■ Setting Procedure
Switch to setting mode.
Set the forward/reverse lever to
the trigger switch lock position, and
hold down the OK button.
Choose "c4" by pressing
the ▲ and ▼ buttons, and
press the OK button.
A set value appears on the display.
Select a desired one by
pressing the ▲ and ▼
buttons.
The default is "_1".
Display
28
EN
P. 22
Quantity reset
permission
Not permitted
( Manual reset disabled)
Permitted
( The manual reset is
permitted.
To execute the manual
reset, hold down the
▼ and ▲ buttons at
the same time.)
(cont.)
When it is set to "_1"
1
A manual
reset is
executed.
Press the OK button to
confirm it.
When the setting is completed, a
buzzer sounds long (a long beep),
and the display returns to the menu
screen.
Back to Operation Mode.
Hold down the OK button.
P. 22
3
The count
goes back to
the default.