Panasonic EYADA Series Operating Instructions Manual page 103

Input/Output Signals
Wire Input/
colour Output
Red Output Fastening OK signal
Blue Output
Yellow Output Motor forward signal
Purple Output Motor reverse signal
Green Input
Light
－
blue
• Only either one of "Fastening NG (NOK) signal" or "Count-up signal" can be used. Select
either one of them through "
Signal name
Fastening NG (NOK)
signal
Count-up signal
Drive permission signal
COM
b2
External-Output Signal Setting".
Remark
Output when fastening is OK.
(Fixed for 0.5 s)
Output when fastening is NG (NOK).
(Fixed for 0.5 s)
Output when the set count quantity is
completed.
(Fixed for 0.5 s)
Output continues in a motor forward
state.
Output continues in a motor reverse
state.
When "_1" or "_2" is set through "
b3 External-Input Drive Permission
Setting", the motor is driven only while
an ON signal is being input.
P. 42
This terminal is minus common.
When applying a voltage, connect it to
the negative side.
P. 41
45
EN