Van Raam Chat User Manual page 32

The right lubricant
The chain should be cleaned and maintained regularly (approx. once every three months).
Only use special chain grease or Teflon spray. This is the only way to ensure that the chain
moves smoothly, remains water-repellent and does not rust.
1. Clean the chain with a cloth.
2. Treat the chain with grease or spray.
3. Remove all abundant lubricants with a rag.
Never treat any of the other parts with lubricant.
The correct tire pressure
Make sure there is enough air in the tires before every trip. Please note, your bike is fitted
with car-type valves. The correct tire pressure is listed on the side of each tire.
Inspection of the trishaw
It is necessary to have the bike inspected by a dealer at least once a year. This in order to
extend your warranty claim. Please use the 'Service, Maintenance and Modifications Form'
at the back of this manual when doing so. The first maintenance will be performed after
the first 200 kilometres or two months.
In case of failure or defects, immediately bring the trishaw to the dealer for repair.
The replacement of safety-related components (i.e. frame, brakes, lights, handlebars, front
fork and drive) must be done by your dealer.
If you choose to replace components by yourself, you will be liable for any damage or
injury caused by improperly installed components.
Only use original Van Raam spare parts. You can purchase these from your dealer. Upon
request, the dealer will provide the necessary information for repair and maintenance.
Version 24.01
32/43