Table of Contents
Advertisement
Do not pull out the saddle pin further than the marking. The
tube will not go into the shank deep enough and will risk
coming off. This can lead to serious injuries.
Handlebars height
The height of the handle bars affects the
comfort of the ride. It determines the pressure
on the hands and the position of the back. You
decide the most comfortable position yourself
with some practice.
To adjust the handlebars:
1.
Slightly loosen the screw by using an Allen
key.
2.
Slide the handlebars to the correct height
and tighten the screw very firmly again.
Do not pull out the handle bars further than the mark.
Otherwise the tube will not be deep enough in the shaft
and will risk coming off, which can lead to serious injuries.
Position handle bars
You can tilt the handlebars. This influences the
distance from the handlebar to the upper body.
Determine your own most comfortable position
by using the bike.
To tilt the handlebar:
1.
Slightly loosen the screws [A] and [B] with
an Allen key.
2.
Put the handlebar in the desired position
and then tighten the screws considerably.
3.
Slightly loosen screw [C] with an Allen key,
put the handlebar in the correct (horizontal)
position and then tighten the screw again.
Version 24.01
1.
3.
[C]
[A]
1.
MIN INSERT
2.
MIN INSERT
2.
[B]
9/55
Advertisement
Table of Contents
